If you live in an area where flooding might be a problem, it is important that you first assess flooding risk and then you take the appropriate measures to be sure that the house is secured. Different renovations and preparations will most likely be necessary, like installing flood control systems or applying sealants in foundation cracks. Contacting professionals like fixitrightplumbing.com.au/plumber-berwick/ is normally a good idea since you want to first have the home assessed by a specialist.
When you build the house in flood-prone areas or in the event the home was not properly built, flood-proofing work is normally necessary since you want to minimize all possible flood damage. Some efficient flood control methods that will surely protect the home are presented below.
Raising Homes On Piers Or Stilts
This is something that is quite expensive to retroactively conduct but it is going to raise the entire flood level of the home. Remember the fact that one flood water inch will lead to avoiding a lot of possible damage. Such a move can do wonders to protect the house.
Install Sump Pumps Or Foundation Vents
Foundation vents will allow the flood water to simply go through the home instead of simply pooling right around it. Such an addition is going to offer an outlet for the water and will relieve a lot of the pressure that could be put on basement windows and walls. Use sump pumps in order to remove water out of your basements in the event that flooding regularly happens. The best option possible is the one that includes the battery backup. This will allow you to use the sump pump even if you do not have power.
Always Apply Sealants And Coatings
This is a dry flood-proofing method. Sealants and coatings applied to windows, doorways, walls and foundation will always prevent the flood water from developing into leaks that would move inside homes through the cracks.
Raise Electrical Switches And Outlets
All your sockets, circuit breakers, switches and outlets need to be a minimum of one foot above the level of the flood. This will prevent any significant electrical damage that could appear if floods happen.
Install Quality Check Valves
You have to be sure that every single pipe that enters the house includes a valve so that flooded sewage systems do not end up backing up. The gate valves are always preferred when compared to the flap valves. This is because better seal is offered against pressure generated by a potential flood.
Grade Lawns Away From Houses
When you have a lawn that is tilting towards the house, whenever it rains the water is going to pool around the property. Utilize heavy soil with sand and clay content in order to adjust lawn regrade. Surface runoff would empty into a more suitable place, like the local street gutter.
Create Space Between Siding And Mulch
The siding of the house would rot if wet mulch would be present. This can often lead to a leak. You need to keep space between siding and mulch so house base would dry completely following the rainstorm.